| 標準編號 | 規范中文名字 | 規范英文名字 |
| GB/T4213-1992 | 自力式調節閥 | Pneumatic industrial process control valves |
| GB10869-1989 | 發電廠調節閥門技術條件 | Specification of control valves for fossil power stations |
| JB/T7228-1994 | 電動風閥 | |
| JB/T57182-1994 | 自力式調節閥產品品質分等 | |
| JB/T57218-1994(2005復核) | 自力式調節閥穩定性規定與考核方法 | |
| HG/T3237-1989 | 橡塑機械用自力式調壓閥 | |
| NF C46-503-1999 | 工業生產全過程調節閥門.第2-1一部分:總流量.在組裝標準下液體流量的調節橫截面方程式 | (Industrial-process control valves. Part 2-1 : flow capacity. Sizing equations for fluid flow under installed conditions.) |
| NF C46-502-1993 | 工業生產全過程用調節閥門.第1一部分:專業術語和總論 | (Industrial-process control valves. Part 1 : control valve terminology and general considerations.) |
| NF C46-506-1990 | 工業生產全過程用調節閥門.總流量.總流量的特點和矯正的原有指數 | (Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.) |
| NF C46-525-1991 | 工業生產全過程用調節閥門,調節閥的限制柵屏 | (Industrial-process control valves. Control valve data sheet.) |
| NF M62-301-4-2001 | 密封罩用部件.第4一部分:自然通風和汽體清理系統軟件(如:過濾裝置和蒸汽疏水閥)的安全性和調節閥及其調節和保護設備 | (Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.) |
| ANSI/UL 144-2001 | 壓縮天然氣調壓閥的檢測標準 | (Standard for Safety for Pressure-Regulating Valves for LP Gas) |
| EN ISO 5135-1998 | 聲學材料 在混響室中測量中央空調智能終端、中央空調終端設備模塊、閥門減振器和調節閥的規范歸納噪音輸出功率級 | Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
| EN 88/prA2-2001 | 通道工作壓力200毫巴下列的燃氣器具的調壓閥 改動A2 | Pressure governors for gas appliances for inlet pressures up to 200 mbar; Amendment prA2 |
| prEN 14129-2001 | 液化石油汽（LGP）罐調壓閥 | Pressure relief valves for LPG tanks |
| EN 88-1991 A1-1996 | 通道工作壓力200毫巴下列的燃氣器具的調壓閥 | Pressure governors for gas appliances for inlet pressures up to 200 mbar |
| DIN V 19259-2-1999 | 機器設備參考文獻.調節閥門需帶歸類平面圖的基本數據類型 | (Documentation of devices - Standard data element types with associated classification for valves) |
| DIN EN 60534-6-1-1998 | 工業生產步驟調壓閥.第6一部分:調節閥推動的部位控制器固定不動用組裝關鍵點.第1節:行程安排推動上部位控制器的組裝 | (Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997) |
| DIN 3163-1974 | 公稱直徑25的冷卻液循環系統直達調節閥門 | (Control through valves for refrigerant circuits, nominal pressure 25 bar) |
| DIN 32730-1993 | 供暖設備中水和蒸汽用具備安全功能的調節閥門.安全生產技術規定和檢測 | (Valves with a safety function for water and steam in heating systems; safety requirements and testing) |
| DIN 58600-2003 | 吸氣保護裝置.法國消防大隊用調節耗氧量O2調節閥門與單獨引路空氣壓縮呼吸面罩面具中間的插塞聯接 | (Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade) |
| UL 144-1999 | 壓縮天然氣調節閥門 | (LP-gas regulators ) |
| UL 17-1994 | 汽柴油機器設備用通風口或煙筒射頻連接器調節閥 | (Vent or chimney connector dampers for oil-fired appliances ) |
| JIS B8387-2000 | 液壓.四孔調節閥和四孔方向控制閥門.02,03,05規格.夾緊規格 | (Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions) |
| IEEE 1189-1996 | 大型設備用調節閥門鉛酸電池(VRLA)電瓶的選用手冊 | (Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications) |
（作者：新聞中心）